Schoeps CCM 2H K, Compact Microphone, omnidirectional
As can be seen from the frequency response curve, this microphone type has flat frequency response for frontal sound incidence
Accessories for this and other products can be found in the category "Accessories".
As can be seen from the frequency response curve, this microphone type has flat frequency response for frontal sound incidence. This yields a very natural quality when picking up sound that is predominantly direct, i.e. close to the source or in a ”dry” acoustic.
ORDER NUMBER: No. 121010 CCM 2H K (permanently attached cable), incl. SGC and Premium Case
Features:
· omnidirectional
· linear frequency response
· corrected for the direct sound field
· for use close to the sound source (frontal sound incidence)
· preferred applications: close pickup of singers and instruments
PRACTICE
The CCM 2 is meant to be placed in close proximity to the sound source. The sonic impression never becomes overly brilliant or harsh. Please note that there is some directivity at high frequencies due to the physics of sound. Thus even with an omnidirectional microphone, it still matters which way the capsule is “aimed.”
TECHNICAL SPECIFICATIONS
Frequency range: see corresponding capsule
Sensitivity: see corresponding capsule
Maximum sound pressure level (THD < 0.5 %): 135 dB-SPL (P48)
127 dB-SPL (P12)
Maximum output voltage: 2,6 V (8,3 dbV) with 2 kΩ load
Low cut filter: 20 Hz, 12 dB/Okt.
Output impedance: 90 Ω @ 1 kHz
Maximum cable length : > 400 m
SCHOEPS RFI Shield: No
Powering standard / Valid range: P48 / > 40 V
P12 / > 10 V
Current consumption: 4 mA (P48)
3,6 mA (P12)
Common mode rejection ratio (at 1 kHz): > 55 dB
Minimum recommended load impedance: 2 kΩ
Output: Lemo (CCM-L) or XLR-3M (CCM-K),
analog, 1 channel
Surface finish: matte gray
Length: 46 mm (CCM-L)
Diameter: 20 mm
Weight: 33 g (CCM-L)