Schoeps MiniCMIT, Shotgun Microphone
€2,133.60
per piece
Tax included
The shotgun microphone MiniCMIT offers the characteristics of a CMIT 5 in more compact form. The MiniCMIT, CMIT 5 and SuperCMIT (ch2) have identical frequency response curves.
Accessories for this and other products can be found in the category "Accessories".
The shotgun microphone MiniCMIT offers the characteristics of a CMIT 5 in more compact form. The MiniCMIT, CMIT 5 and SuperCMIT (ch2) have identical frequency response curves. Furthermore, the MiniCMIT and CMIT 5 have circuitry with similar characteristics, such that the microphones can be interchanged without altering the sound. The MiniCMIT is recommended for use with digital transmitters such as the Audio Ltd. A10-TX for two reasons:
· The MiniCMIT can use P12, which is more power-efficient.
· The MiniCMIT has the latest version of the Schoeps RFI Shield, which has been specifically developed and tested for this type of application.
ORDER NUMBER: No. 140103 standard blue
Following Options available on request:
No. 140104 anthracite gray
No. 140106 chromagreen
Features:
· mild high-frequency response elevation at 0°, which compensates high frequency losses caused by a slightly increased diffuse field amount at medium recording distance
· ideal for A/B stereophony and Decca Tree
TECHNICAL SPECIFICATIONS:
Pickup pattern: Supercardioid / lobe-shaped
Frequency range: 60 Hz - 20 kHz
Sensitivity: -35 dB (V/Pa), 17 mV/Pa
Equivalent noise level (A-weighted): 14 dB
Equivalent noise level (CCIR): 24 dB
Signal-to-noise ratio (A-weighted): 80 dB
Maximum sound pressure level (THD < 0.5 %): 130 dB-SPL (P48)
115 dB-SPL (P12)
Maximum output voltage: 1 V (0 dBV) with 2 kΩ load
Low cut filter: fixed, 70 Hz, 24 dB/oct.
Minimum recommended load impedance: 2 kΩ
Output impedance: 100 Ω
Maximum cable length : >100 m
SCHOEPS RFI Shield: Yes
Powering standard / Valid range: P48 / >24 V
P12 / >11 V
Current consumption: 2.3 mA (P48)
Common mode rejection ratio (at 1 kHz): > 55 dB
Output: XLR-3M, analog, 1 channel
Surface finish: blue
custom color: anthracite gray, chromagreen
Length: 151 mm
Diameter: 21 mm
Weight: 78 g
The shotgun microphone MiniCMIT offers the characteristics of a CMIT 5 in more compact form. The MiniCMIT, CMIT 5 and SuperCMIT (ch2) have identical frequency response curves.